Once you have set up your events and channels and shared the invite information, you are ready to start streaming.

Follow the steps below or watch this video: 

Step 1: Plug in audio source 

For original audio, you might want to use a sound mixer. For interpretation, you will usually use a mic/headphone combination. 

For more tips about connecting your audio source to a sending divide, take a look here. 

Step 2: Join event

Open the app on your mobile device. On computers enter livevoice.io in your web browser.

Enter your speaker code or follow the smart link. You get a speaker code or a smart link from your admin (e.g., event organizer) who has set up the event and channels. Simply enter this code and join.

Allow microphone access.

The app or browser will ask you to allow microphone access. In some browsers, you can choose which microphone you want to use. You also might want to check in your computer's audio settings, which microphones are available.

Make sure you chose the right audio input in LiveVoice.

Simply go to the input device selection and set the input/microphone you want to use.

Step 3: Start

Once you have entered the code, you are in the "Speaker Lobby". You will see "My channel" written in orange under your own channel title on the right side. In this case, "Channel 1". With the "Mic level check", you can check if an audio signal is received in LiveVoice. The level then moves when you speak.

When you are ready to go live, push the "Start" button.

That's it. You are live!

If you want to mute yourself, simply click on the "Mute" microphone button.

When the left side of the speaker interface turns blue, you are muted.

To check how people can hear you, take a second device and enter the participant code.

You can listen to other channels if they are active by clicking play next to their name. 

Note: On computers all browsers work with LiveVoice, but we recommend using Chrome or Firefox, as these are best for streaming.

Next: How to join LiveVoice as participant.